As an organization, the CAAC/ATMB is responsible for national air traffic services, civil aviation communications, navigation, surveillance, aviation meteorology and flight information.
The simulation centres of two CAAC/ATMB regional divisions recently received the upgrade to replace projectors from another supplier as the original projectors was unable to meet the vital colour contrast requirements of dark-field for night time simulation training.
Eight Digital Projection E-Vision 7500 WUXGA 3D projectors replaced the original projectors in the first centre, where the integrated simulation system creates a 360-degree seamless projection environment on a screen measuring four metres high and twelve metres in diametre. In the other division, a smaller screen dimension called for a replacement specification of eight Digital Projection E-Vision 6800 WUXGA 3D projectors.
Initial attempts had been made to correct the colour contrast problem for the existing projectors. Filters were installed in front of the projection lenses to improve the lack of contrast in a bid to meet the training requirements for dark-field. This, however, triggered further consequences in terms of brightness attenuation. With the projectors unable to meet the needs of the simulation centre, there was no other alternative but to replace them with projectors capable of meeting these strict requirements.
Unwilling to take further chances with its training, the CAAC/ATMB embarked on rigorous screening and comparison of the projectors available on the market and eventually selected the Digital Projection E-Vision 3D series.
Unsurprisingly, the deciding factor came down to the excellent colour and contrast of the E-Vision series which met the necessary training requirements without the need to add a filter. Boasting a 1920 x 1200 resolution, the E-Vision WUXGA models provide sufficiently enhanced projection quality to meet the user’s screen clarity requirements. Additionally, featuring 7,500 ANSI lumens of brightness (6,800 from the Digital Projection E-Vision 6800 WUXGA 3D), the Digital Projection E-Vision 7500WUXGA 3D is powerful enough to satisfy the differing lighting environments that are so important within the air traffic simulation chamber.
Commenting on the upgrade, an official of the CAAC/ATMB stated: “The new projectors from Digital Projection outclassed the competition and we now have a simulation system that meets our full specification requirement.”
Digital Projection’s International Marketing Manager, Mark Wadsworth, commented, “As a leader in projection system development,, Digital Projection prides itself on the production of pioneering products that meet the most exacting standards in every market it serves. In pivotal training environments such as those of the CAAC/ATMB, it is reassuring to know that Digital Projection products exceed the customer’s operative expectations and succeed in meeting every standard necessary.”